welcome,guest
Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2017-12-20 22:52
149
Company Profile
Xiamen Forthwill Architectural Co.,Ltd.By certification [File Integrity]
Contact: forthwill(Mr.)
Telephone:
Area: Beijing
Address: Beijing
Website: http://forthwill.huixincheye.com/
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
Installation Manual |
1. You will need to drill a clearance hole in the ABS brackets at the appropriate recessed ports. |
Place the panel mounts on a flat surface, then position the panels onto the mounts. Drill a pilot |
hole through mount directly into panel frame. When drilling the holes in the solar panel frame to |
attach the bracket try and drill the hole more towards the center of the panel frame to avoid any |
damage to the solar panel glass and cells. |
2. Attach the brackets to the solar panel frame using a self-tapping stainless steel or |
galvanized screws |
3. Mark the mounting location for the panels on the surface to which the panels will be mounted. |
4. After applying the Sikaflex-715 to your Brackets install them to your pre marked position on |
your roof. Ensure you have the panel orientated so the wires/cables coming out the back are on the |
correct side. Following the Sikaflex-715 installation instructions that come with the Sikaflex |
product; lightly press down over the top of each bracket to ensure the Sikaflex-715 makes a good |
contact with all surfaces. |
5. Refer to the Sikaflex instructions and allow the required time for the Sikaflex - 715 |
to completely dry before connecting the wires/cables. |
HELPFUL TIP: To help reduce the wires flapping on the roof while you are travelling put |
some Sikaflex-715 on the wires in Various Places and adhere them to the roof. |
6. While you are waiting for the Sikaflex-715 to dry, install your PV charge controller in the |
permanent position you have previously chosen. It is recommended the PV Charge Controller |
should be installed in a dry, sheltered location away from sources of high temperature and moisture. |
PLEASE NOTE: This instructions are a simple guide for the installation of the U-MO-ABS Series |
Plastic Panel Mounts. It is most important you follow the Sikaflex715 ( or other manufacturer ) |
Ind tructions to ensure the panels are mounted safe and secure. |